Product index
41060
|
Product number
TR2200HS
|
Product name
PENETRANT/SEALER
|
Product group
1
|
Summary code
HS
|
Product description
Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant Sealer is a 100% solids, zero VOC, high performance environmentally friendly proprietary penetrant sealer formulated specifically to remain active. Its unique properties allow it to neutralize acid, displace moisture, scavenge oxygen, thoroughly wet surfaces and stop corrosion, pack rusting, and rust staining (bleeding) on steel structures. The unique chemistry addresses the physical and chemical components of the crevice corrosion and pack rust.
|
Uses
For application to joints, crevices, back to back angles and tubing on steel structures such as bridges, towers, cranes, conveyor systems, cable suspension systems and vehicle frames where coating is impossible.
|
Advantages
NA
|
Chemistry + solvents
High Ratio Co-Polymerized Calcium Sulfonate ( Minimum 9.5% active sulfonate, a total base number of 95 to 110, must maintain a 10 to 1 ratio Active Sulfonate to Total Base Number)
|
System solvent
Termarust thinner TRT 01
|
Color
Clear amber solution
|
Gloss
Low Gloss
|
Mix ratio
NA
|
Viscosity
800-1500 CPS Brookfield RVT #2 at 10 RPM
|
Solids by weight
100%
|
Solids by volume
100%
|
Density
NA
|
Volatile Organic Compounds (VOC)
Zero
|
Sag resistance
NA
|
Dry Film Thickness (DFT)
Variable
|
Spread rate
43 sq. m. per litre @ 1 mil DFT
1604 sq. ft. per U.S. Gal. @ 1 mil DFT
|
Dry time
When used as a penetrant only allow 24 hours for maximum penetration. Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant/Sealer may be topcoated wet on wet when an extra 10 mils DFT of Termarust 2100 High Ratio Co- Polymerized Calcium Sulfonate Primer/Topcoat is applied to the pack rusted joints, crevices, or back to back angles during the cutting in process.
|
|
Working pot life
NA
|
Performance data
NA
|
Chemical resistance
NA
|
Surface preparation
Spot repairs of failed joints
Remove excessive dirt and contaminants. Open joints with a sharp object to allow the Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant/Sealer to penetrate thoroughly.
Waterjetting joints
Joints should be blown out with high-pressure air to insure water has been removed. When used without the Termarust 2100 High Ratio Co- Polymerized Calcium Sulfonate Primer/Topcoat, two applications of Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant/Sealer are recommended for maximum performance. In this case allow at least 12 hours between applications.
|
Application
Thoroughly wet out all joints, crevices, cables, back to back angles, tube interiors and areas to be protected with Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant/Sealer by spray or brush.
Excessive Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant/Sealer allowed to remain on other surfaces will inhibit the dry of the Termarust 2100 High Ratio Co- Polymerized Calcium Sulfonate Primer/Topcoat and should be brushed out.
|
Application equipment
NA
|
Compatible systems
Termarust TR2100 High Ratio Co- Polymerized Calcium Sulfonate Primer/Topcoat (Remove excess Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant/Sealer before applying topcoat)
|
Thinning
Spray: No thinning required
|
Clean up
Termarust thinner TRT 01
|
WEIGHT PER GALLON
9.03lbs ± .25
|
Shelf life
12 months in original unopened container when stored in a protected area where the temperature is between 5°C and 30°C (41°F - 86°F). After 12 months material should be mixed and inspected before use.
|
Safety precautions & regulatory data
Treat as flammable liquid - Flashpoint 42°C (108°F). Keep away from heat, open flame and sparks. Avoid contact with skin and eyes. Avoid prolonged breathing of vapor. Read label instructions carefully and refer to Material Safety Data Sheet supplied. This product is for industrial use only and is not intended for use in or around a household or dwelling.
|
Notes
The technical data given herein has been compiled for your help and guidance and is based upon our experience and knowledge. It is subject to modification from time to time in the light of experience and our policy of continuous product development. Persons using this product must first satisfy themselves as to its suitability for the intended purpose. Please contact your representative for complete recommendations. A complete Termarust TR2200HS High Ratio Co- Polymerized Calcium Sulfonate Penetrant/Sealer application specification is available upon request.
|
|
