Products
Technical data


Product index
42010
Product number
TT2400 
Product name
HIGH SOLIDS POLYURETHANE  
Product group
1  
Summary code
PP-IF-BT-SL  
Product description
A two-component high solids aliphatic polyurethane providing a hard, durable, chemical resistant film having excellent gloss and color retention to exterior exposure.  
Uses
Suitable for application to infrastructure,bridges, automotive, machinery and construction equipment especially in moderate to severe environments.  
Advantages
NA  
Chemistry + solvents
Polyacrylate - Polysocyanate  
System solvent
Aliphatic Hydrocarbon and Ketone  
Color
Federal grey #16440  
Gloss
85° minimum  
Mix ratio
5.78 measures by volume A (TT2400).
1 measure by volume B (Catalyst TCAT2435).
 
Viscosity
105 KU mixed 
Solids by weight
80% ± 2% (mixed) 
Solids by volume
70% ± 2% (mixed) 
Density
NA 
Volatile Organic Compounds (VOC)
286 ± 20 grams per litre 
Sag resistance
NA 
Dry Film Thickness (DFT)
3.5 - 5.0 mils (dry) by coat
5 - 7 mils (wet) by coat 
Spread rate
1122 sq.ft/3.78 liters 
Dry time
TOUCH: 3.5hours
HARD: 5 hours
RECOAT: after 2 hours
(After 7 days a light sanding is required)
 
Working pot life
With TCAT2435: circa 45 minutes 
Performance data
When properly applied, the two-component polyurethane coating will provide excellent durability and protection from corrosion and the effects of exposure to sunlight such as fading and chalking. 
Chemical resistance
NA 
Surface preparation
Surface should be properly coated with suitable primer. 
Application
The coating should be applied only when the air, surface and product temperature is between 25ºC to 30ºC (72ºF to 86ºF) and the surface has been properly prepared. 
Application equipment
NA 
Compatible systems
Termazinc TZ1100 +
Termapoxy TE2330 +
Termathane TT2400
 
Thinning
CONVENTIONAL Thin as required with circa 10% of solvent TRT56 (MAX) 
Clean up
Use thinner TRT51. 
Shelf life
Keep in original unopened container when stored in a protected area where the temperature is between 5ºC to 30ºC (41ºF to 86ºF). 
Safety precautions & regulatory data
Treat as flammable liquid * Flash point 102ºC (39ºF). Keep away from heat, open flame and sparks. Use with adequate ventilation. Avoid contact with skin and eyes. Avoid prolonged breathing of vapor. Read label instruction carefully and refer to Material Safety Data Sheet supplied.

This product is for industrial use only and is not intended for use in or around a household or dwelling.
 
Notes
The technical data given herein has been compiled for your help and guidance and is based upon our experience and knowledge. It is subject to modification from time to time in the light of experience and our policy of continuous product development. Persons using this product must first satisfy themselves as to its suitability for the intended purpose. Please contact your sales representative for complete recommendations. 


Last change: Version: 06.6:.2009   


                               
THE BEST CORROSION CONTROL PERFORMANCE GUARANTEED

 
Copyright 2002-2010 Termarust Technologies. All rights reserved.