Product index
45010
|
Product number
TA6100
|
Product name
GLASS FILLED ACRYLIC ROOF INSULATING COATING
|
Product group
1
|
Summary code
C-WB
|
Product description
Termaqua TA6100 is a glass filled, high viscosity, single component, air dry waterbased fast dry acrylic latex roof insulating coating. The product is specifically formulated to act as a cool roof coating especially in extremely hot climates as it attacks the cool roof problem with two elements instead of one. The white color as well as the high ratio of insulating hollow glass. The TA 6100 has excellent UV resistance, color and gloss retention, flexibility, insulating properties and good corrosion resistance. Apply direct to existing roof coatings or properly prepared new substrates.
|
Uses
Termaqua TA6100 may be used to overcoat tightly adhere contaminate free roof coatings, to topcoat Termaqua TA6010 Basecoat, Termaqua TA6200 Flexible Acrylic Crack Filler or Termaqua TA6080 Primers. As a roof insulation coating it maybe used for both industrial and residential structures producing savings of 50% or more in cooling costs. Application may take place over almost all roofing material including prepared metal, foam, asphalt, rubber and existing in place acrylic roof coating systems.
|
Advantages
NA
|
Chemistry + solvents
NA
|
System solvent
Deionized Water
|
Color
White
|
Gloss
Medium
|
Mix ratio
NA
|
Viscosity
112 KU
|
Solids by weight
51% ± 2%
|
Solids by volume
43% ± 2%
|
Density
NA
|
Volatile Organic Compounds (VOC)
.9 Lbs. / U.S. Gal
100 grams per liter
|
Sag resistance
NA
|
Dry Film Thickness (DFT)
20 mils TA 6010 Basecoat, 20 mils TA 6100 Cool Roof Coating
|
Spread rate
2 gallons per 100 sq ft TA 6010 Base
2 gallons per 100 sq ft TA 6100 Cool Roof Coating
|
Dry time
TACK FREE: 1 hour
HARD: 3 to 4 hours
|
|
Working pot life
NA
|
Performance data
NA
|
Chemical resistance
NA
|
Surface preparation
NA
|
Application
The Termaqua TA6100 should be applied only when the air and product temperature is between ºF to 100ºF unless step are taken to slow the dry and the surface has been properly prepared. The surface temperature should not exceed 125°F during application.
|
Application equipment
Maybe applied with Spray, airless or conventional, roller, brush.
|
Compatible systems
Termaqua TA6080 Primer, Termaqua TA6010 Tan Basecoat, Termaqua TA 6200 Flexible Acrylic Crack Filler, Termafluro TF9600
|
Thinning
Brush/Roller: Not required. If desired reduce maximum of 15% by volume with Clean Deionized Water
Airless: Reduce up to 45 % by volume with Clean Deionized Water
Conventional Spray: Reduce up to 45 % by volume with Clean Deionized Water
|
Clean up
Use Clean water
|
GENERIC TYPE
Waterbased Glassfilled Acrylic
|
WEIGHT PER GALLON
10.03 lbs per gal. ± 2%
|
Shelf life
24 months in original unopened container when stored in a protected area where the temperature is between 5°C to 30°C (41°F to 86°F).
|
Safety precautions & regulatory data
Use with adequate ventilation. Avoid contact with skin and eyes. Avoid prolonged breathing of vapor. Read label instruction carefully and refer to Material Safety Data Sheet supplied. This product is for industrial use only.
Note: The technical data given herein has been compiled for your help and guidance and is based upon our experience and knowledge. It is subject to modification from time to time in the light of experience and our policy of continuous product development. Persons using this product must first satisfy themselves as to its suitability for the intended purpose. Please contact your sales representative for complete recommendations.
|
Notes
NA
|
|
