Product index
45040
|
Product number
TA6300
|
Product name
WATERBASED ANTI-SKID COATING
|
Product group
1
|
Summary code
C-WB
|
Product description
TERMAQUA TA6300 Non-Skid is a lightweight, non-slip floor and deck covering compound developed for use over aluminum, steel, wood, concrete or polyester. This material is used on areas subject to foot traffic in confined spaces. It is long wearing with a hard, non-porous surface and is resistant to extreme temperatures.
TERMAQUA TA6300 Non-Skid contains a synthetic, resinous binder and abrasive particles. Because it is water-based, it is easy to apply, especially in areas where solvents are a problem.
|
Uses
NA
|
Advantages
NA
|
Chemistry + solvents
NA
|
System solvent
NA
|
Color
Termaqua TA6300 Non-Skid is available:
• black
• yellow, red
• light gray
• green, and white
• dark gray
Arrangements can be made for other colors
|
Gloss
NA
|
Mix ratio
NA
|
Viscosity
NA
|
Solids by weight
NA
|
Solids by volume
NA
|
Density
NA
|
Volatile Organic Compounds (VOC)
NA
|
Sag resistance
NA
|
Dry Film Thickness (DFT)
NA
|
Spread rate
NA
|
Dry time
NA
|
|
Working pot life
NA
|
Performance data
NA
|
Chemical resistance
NA
|
Surface preparation
In order to obtain optimum adhesion to a surface, that surface must be free of all foreign matter. This one-part water- based system can be applied directly over prepared concrete or over Ferox 33000 epoxy primer when applied over wood, steel, aluminum or polyester. For best results, please review the Termarust Surface Preparation Manual.
|
Application
NA
|
Application equipment
An excellent surface profile may be obtained with a brush or short-nap roller. Gryphin TERMAQUA TA6300 Non-Skid may also be applied with spray equipment, using an agitated bottom feed pot with 3/4" hose, 1/4"'fluid nozzle, and 1/4" airtip.
|
Compatible systems
NA
|
Thinning
NA
|
Clean up
Because TERMAQUA TA6300 Non-Skid is water-based, equipment used for application can be cleaned with water.
|
CURING TIME
At 70ºF 24 hours (foot traffic).
|
THICKNESS AND COVERAGE
When applied by roller or brush at an aver-age of 20 mils film thickness, each gallon will cover approximately 50 square feet. When applied by spray at an average film thickness of 15 mils each gallon will cover approximately 55 square feet.
|
Shelf life
NA
|
Safety precautions & regulatory data
NA
|
Notes
NA
|
|
