Product index
45050
|
Product number
TA6010
|
Product name
WATERBASED ACRYLIC COATING
|
Product group
1
|
Summary code
C-WB
|
Product description
Termaqua TA6010 is a high viscosity, single component, air dry waterbased fast dry acrylic latex. Excellent UV resistance, color and gloss retention, flexibility, good corrosion resistance. Apply direct to existing paint, over metal or concrete.
|
Uses
Termaqua TA6010 may be used to overcoat tightly adhere contaminate free paint, rust, direct to metal concrete or to topcoat Termaqua TA6080 Primers. As an industrial maintenance coating it maybe used as a coating for the marine industry, structural steel, bridges, tanks, piping, towers, gas meters, standpipes etc. Use anywhere Enamel or oil based paints would be specified.
|
Advantages
NA
|
Chemistry + solvents
NA
|
System solvent
Deionized Water
|
Color
Standard colors (Custom colors on request)
|
Gloss
High Gloss 85º minimum
|
Mix ratio
NA
|
Viscosity
42000-45000 cps
|
Solids by weight
45% ± 1%
|
Solids by volume
39% ± 1%
|
Density
NA
|
Volatile Organic Compounds (VOC)
1.2 Lbs. / U.S. Gal
144 grams per liter
|
Sag resistance
NA
|
Dry Film Thickness (DFT)
As needed
|
Spread rate
Theoretical coverage at 1 mils DFT
625 square feet / U.S. Gal DFT
|
Dry time
TACK FREE: 1hours
HARD: 3 to 4 hours
|
|
Working pot life
NA
|
Performance data
NA
|
Chemical resistance
NA
|
Surface preparation
All grease, oil, grime, loose rust and other contaminants must be removed from the surface using solvent, commercial or other suitable cleaning method. On steel degrease according to SSPC-SP1 solvent cleaning. The surface coated over will greatly determine the smoothness of the finish.
|
Application
The waterbased acrylic should be applied only when the air and product temperature is between ºF to 100ºF and the surface has been properly prepared. The surface temperature should not exceed 125°F.
|
Application equipment
Maybe applied with Spray, airless or conventional, roller, brush, mitt.
|
Compatible systems
Termaqua TA6080 Primers
|
Thinning
Brush/Roller: Not required. If desired reduce maximum of 15% by volume with Clean Deionized Water
Airless: Reduce up to 45 % by volume with Clean Deionized Water
Conventional Spray: Reduce up to 45 % by volume with Clean Deionized Water
|
Clean up
Use Clean water
|
GENERIC TYPE
Waterbased Acrylic
|
Shelf life
24 months in original unopened container when stored in a protected area where the temperature is between 5°C to 30°C (41°F to 86°F).
|
Safety precautions & regulatory data
Use with adequate ventilation. Avoid contact with skin and eyes. Avoid prolonged breathing of vapor. Read label instruction carefully and refer to Material Safety Data Sheet supplied. This product is for industrial use only.
Note: The technical data given herein has been compiled for your help and guidance and is based upon our experience and knowledge. It is subject to modification from time to time in the light of experience and our policy of continuous product development. Persons using this product must first satisfy themselves as to its suitability for the intended purpose. Please contact your sales representative for complete recommendations.
|
Notes
NA
|
|
