Product index
45060
|
Product number
TA6070
|
Product name
WATER REDUCIBLE ALKYD
|
Product group
1
|
Summary code
C-WB
|
Product description
Termaaqua TA6070 is a single component air dry Water-Reducible fast dry synthetic alkyd enamel. Excellent color retention, flexiblility, good corrosion resistance. Apply direct to existing paint or over metal.
|
Uses
Termaaqua TA6070 may be used to overcoat tightly adhere contaminate free paint ,rust, direct to metal or to topcoat Termaaqua TA6080 Primers An industrial maintenance coating it maybe used as a coating for the marine industry structural steel, bridges, tanks, piping, towers, gas meters standpipes Use anywhere Enamel or oil based paints would be specified.
|
Advantages
NA
|
Chemistry + solvents
NA
|
System solvent
Water
|
Color
Standard colors (Custom colors on request)
|
Gloss
Gloss
|
Mix ratio
NA
|
Viscosity
65-80 Kreb Units
|
Solids by weight
47% ± 2%
|
Solids by volume
35% ± 2%
|
Density
NA
|
Volatile Organic Compounds (VOC)
<2 Lbs. / U.S. Gal
|
Sag resistance
NA
|
Dry Film Thickness (DFT)
1.5 to 2.5 mils DFT. (3.5 mils to 6 mils WFT)
|
Spread rate
Theoretical coverage at 1 mils DFT
500 square feet / U.S. Gal DFT
|
Dry time
TACK FREE: 1 hour
RECOAT: 2 hours
HARD: 4 hours
|
|
Working pot life
NA
|
Performance data
NA
|
Chemical resistance
NA
|
Surface preparation
All surface areas should be clean and dry. Remove loose paint, rust, all dirt and oil prior to painting. The surface coated over will greatly determine the smoothness of the finish.
|
Application
The Water Reducable Alkyd Enamel should be applied only when the air and product temperature is between 45ºF to 110ºF and the surface has been properly prepared. The surface temperature should not exceed 125°F.Maybe applied with Spray airless or conventional, roller, brush, mitt, dip tank.
|
Application equipment
NA
|
Compatible systems
Termaaqua TA6080 Primers
|
Thinning
Brush/Roller: If desired reduce maximum of 15% by volume with Clean Deionized Water
Airless: Reduce up to 45 % by volume with Clean Deionized Water
Conventional Spray: Reduce up to 45 % by volume with Clean Deionized Water
|
Clean up
Use Clean water
|
GENERIC TYPE
Water-Reducible fast dry synthetic alkyd enamel
|
Shelf life
24 months in original unopened container when stored in a protected area where the temperature is between 5°C to 30°C (41°F to 86°F).
|
Safety precautions & regulatory data
Flash point 125°F. Keep away from heat, open flame and sparks. Use with adequate ventilation. Avoid contact with skin and eyes. Avoid prolonged breathing of vapor. Read label instruction carefully and refer to Material Safety Data Sheet supplied. This product is for industrial use only.
Note: The technical data given herein has been compiled for your help and guidance and is based upon our experience and knowledge. It is subject to modification from time to time in the light of experience and our policy of continuous product development. Persons using this product must first satisfy themselves as to its suitability for the intended purpose. Please contact your sales representative for complete recommendations.
|
Notes
NA
|
|
