Product index
46010
|
Product number
TS3340SS
|
Product name
SILANE SEALER
|
Product group
1
|
Summary code
-BS
|
Product description
TERMASEAL TS3340 is a single component, solvent containing, silane based sealer, designed to give deep penetration into the pores of mineral surfaces such as concrete and masonry.
TERMASEAL TS3340 is not a surface coating: it penetrates deeply and chemically reacts with silica containing substrates to form permanent bonds. Thus the problem of lifting, scaling, and eventually disbonding of the coating film due to moisture infiltration is avoided.
|
Uses
Parking garages.
.Bridges.
.Roads.
.Architectural concrete.
.Bricks (concrete containing).
.Mortars, stucco.
.Silica containing stones.
.Other horizontal and vertical surfaces.
|
Advantages
Simplicity and economy of use.
Does not change the appearance, the color or texture of most sealed surfaces.
Significant reduction of capillary penetration of water and of water soluble aggressive substances (e.g. acid rain).
Major reduction of chloride ion penetration (de-icing salts): protects reinforcing steel.
Reduces penetration of air pollutants (soiling).
Upgrades the appearance of facades and of exterior walls. Improves freeze/thaw resistance.
Reduces efflorescence.
Is not a vapor-barrier: allows equilibration of water vapor pressure across walls (breathing).
|
Chemistry + solvents
Organic Silane
|
System solvent
Termarust (TRT01) Thinner
|
Color
Colorless.
|
Gloss
NA
|
Mix ratio
NA
|
Viscosity
NA
|
Solids by weight
NA
|
Solids by volume
NA
|
Density
NA
|
Volatile Organic Compounds (VOC)
NA
|
Sag resistance
NA
|
Dry Film Thickness (DFT)
NA
|
Spread rate
NA
|
Dry time
14 to 18 hours (@ 15-30ºC)
|
|
Working pot life
NA
|
Performance data
Complies with the requirements of #244 study of the National Co-operative Highway Research Program (U.S.A) when applied at a rate of 3m²/l.:
CONCRETE PENETRATION (mm): 6
REDUCTION IN WATER ABSORPTION (%): 90
REDUCTION IN ABSORPTION OF CHLORIDE IONS (%): 96
|
Chemical resistance
NA
|
Surface preparation
The surface must be sound and clean. Dry surfaces allow maximum penetration. Penetration can be improved by alight sandblasting of the surface. Old concrete must be free of any curing membrane, grease, oil, pain t, etc.
|
Application
Use product as delivered (do not dilute).
The number of applications depends on the porosity of the surface. It is advisable to coat a test area to determine the exact coverage of TERMASEAL TS3340 required for effective waterproofing.
Non-treated adjacent surfaces should be protected against spillage and overspray.
|
Application equipment
Low pressure spray, brush, or roller, applied to saturation of the surface.
|
Compatible systems
NA
|
Thinning
Brush and Roll: Thinning not required
Conventional Air Spray: Thinning not required
Airless Spray: Thinning not required
|
Clean up
NA
|
WEIGHT SOLIDS
40% ASTM D2369
|
POUNDS PER GALLON
1.095 kg/litre ± .25%
9.13 lbs/Gal. US ± .25%
|
COVERAGE
Depends on surface porosity
Concrete approximately : 3m 2/ litre, 114 sq. ft. per US Gal.
|
FLASH POINT
|
THINNER
Termarust TRT01
|
Shelf life
12 months in original unopened containers at temperatures between 5°C et 30°C (41°F - 86°F).
|
Safety precautions & regulatory data
Flammable liquid due to volatile solvent.
Use with adequate ventilation.
Avoid skin contact.
Wash hands thoroughly after each use.
If there is contact with: Eyes: wash profusely with clear water Skin: wash with soapy water.
Refer to Material Safety Data Sheet.
|
Notes
NA
|
|
