TECHNICAL SPECIFICATION
TERMARUST 2306
"BAG IT" FLEXIBLE CONTAINMENT COATING
DESCRIPTION/USES
The TERMARUST 2306 "BAG IT" FLEXIBLE CONTAINMENT COATING may be applied at below freezing and at high humidities. The coating outstanding film forming characteristics allow It to adhere well to the coated surface. This product also displays excellent edge retention and abrasion resistance.
The TERMARUST 2306 "BAG IT" FLEXIBLE CONTAINMENT COATING may be applied at below freezing and at high humidities. The coating outstanding film forming characteristics allow It to adhere well to the coated surface. This product also displays excellent edge retention and abrasion resistance.
To remove TERMARUST 2306 "BAG IT" FLEXIBLE CONTAINMENT COATING, make a clean cut through the coating and then peel it away.
While allowing handling and hauling of encapsulated structure sections, TERMARUST 2306 "BAG IT" FLEXIBLE CONTAINMENT COATING will withstand atmospheric conditions for up to 1 year.
COLOR
Transparent
RESIN TYPE
Proprietary formulation
SOLVENTS
Oxygenated solvents
SOLIDS BY WEIGHT
30% ± 1%
SOLIDS BY VOLUME
21% ± 1%
V.O.C. (VOLATILE ORGANIC COMPOUND)
0 Lbs./Gallon (0 Grams/Litre)
RECOMMENDED DFT (DRY FILM THICKNESS)
2 - 5 mils dry minimum
SPREADING RATE
160 sq. feet / U.S. gallon @ 2mils dry
DRY TIME @ 25°C - 50°% R.H. (RELATIVE HUMIDITY)
TOUCH: 5 minutes
TACK FREE: 5 minutes
HARD: 30 minutes
VISCOSITY
58-62 Kreb Units
APPLICATION
Temperature range: -10°F to +90°F (-23°C to +38°C)
Equipment: conventional or airless spray system
THINNING
SPRAY Thinning normally not required, if necessary use Termarust TR 01.
BRUSH: Thinning normally not required
CLEAN UP: Termarust thinner TR 01
SHELF LIFE
12 months in original unopened container when stored in a protected area where the temperature is between 32°F and 90°F (0°C to 38°C).
SAFETY INFORMATION
Treat as flammable liquid - Flash point 0°C (-18°F). Keep away from heat, open flame and sparks. Use with adequate ventilation when inside. Avoid contact with skin and eyes. Avoid prolonged breathing of vapor. Read label instruction carefully and refer to Material Safety Data Sheet supplied.
This product is for industrial use only and is not intended for use in or around a household or dwelling.
NOTE
The technical data given herein has been compiled for your help and guidance and is based upon our experience and knowledge. It is subject to modification from time to time in the light of experience and our policy of continuous product development. Persons using this product must first satisfy themselves as to its suitability for the intended purpose. Please contact your sales representative for complete recommendations.